Epson Wf pro 4520 Setup | Driver Download - Windows & Mac

 

How To Setup Epson Wf pro 4520 ?

Epson Wf pro 4520 Setup

The Epson WF Pro 4520 printer can perform printing, copying, scanning, faxing, duplex printing, and mobile printing, and so, it is aptly called an All-in-One printer. This printer supports wireless, USB, and Ethernet interfaces. You can quickly connect any wireless device to the printer using WF ProS or Wireless Setup Wizard. If you are setting up an Epson WF Pro 4520 printer for the first time, keep reading the instructions given below.

•  Unpack your printer and take out the printer supplies such as power cord, CD-ROM, telephone line cord, user's guide, and ink cartridges.

•  Remove all the protective tapes and covers from the printer.

•  Next, connect your printer to an electrical outlet using the supplied power cord and turn on the printer by pressing the Power button.

•  Navigate to the control panel and select your language, country, date, and time.

•  Lift/open the front cover and start unpacking your ink cartridges.

•  Gently shake each ink cartridge for about five seconds and remove the protective seals from them.

•  Install all the ink cartridges into the correct slot and close the front cover to start ink priming.

•  After completing the ink charging process, pull the paper cassette entirely out from the printer.

•  Fan a stack of legal plain paper and load it into the paper cassette.

•  Make sure to adjust the loaded paper with the paper width guides.

•  Refix the paper cassette into the printer and extend the paper output tray.

•  If you wish to use the fax function, connect one end of the supplied telephone line cord to your printer's LINE port and the other end to a telephone wall jack.

•  Configure the fax settings on the printer's control panel.

•  Finally, insert the supplied CD-ROM into your computer's CD/DVD drive and run the setup file to begin the driver installation.

•  If your computer doesn't support the CD-ROM, download the printer driver that suits your computer from the official Epson site.

•  Open the downloaded driver package and run the installer file.

•  After completing the driver installation, verify the printer functionality.

EPSON WF Pro 4520 DRIVER DOWNLOAD - DESC

You can download the Epson WF Pro 4520 printer's driver by clicking the Driver Download button on this page. Also, you can download it from the official Epson site. Before downloading the driver, identify your OS and its version. This might be useful when selecting the correct printer driver for your computer.

EPSON WF Pro 4520 DRIVER WINDOWS - STEPS

•  Before downloading the Epson WF Pro 4520 printer's driver on your Windows computer, remove any previously installed Epson drivers.

•  Disable any active firewall or antivirus software.

•  Launch the default browser and visit the official Epson site.

•  Under the Search By Product Name tab, enter your printer's model number and hit the Enter key.

•  Click the Downloads tab and choose your Windows OS version from the Operating System drop-down menu.

•  Select the required printer driver from the displayed list and click the Download button.

•  After completing the download, open the Downloads folder and double-click the downloaded file to run the driver installation.

•  If the device prompts for User Account Control, click the Yes button to continue.

•  Finish the driver installation by following the on-screen prompts.

•  Verify the printer functionality by printing a test page.

EPSON WF Pro 4520 DRIVER MAC - STEPS

•  On your Mac, launch the default browser after ensuring that you have a stable Internet connection.

•  Visit the official Epson site and enter your printer's model number in the search field.

•  Click on your printer's model number from the search result to go to the driver download page.

•  Click the Downloads tab and choose your macOS version from the pull-down menu.

•  Expand Drivers and click the Download button next to your desired printer driver.

•  Now, give a double-click on the downloaded file to create a disk image.

•  Open the created disk image to run the driver installation wizard.

•  Agree to the EULA and follow the on-screen instructions to complete the driver installation.

EPSON WF Pro 4520 MANUAL DOWNLOAD - STEPS

•  You can download the Epson WF Pro 4520 printer's manual by clicking the Manual Download button on this page. If it doesn't support it, you can download it from the official Epson site.

•  Go to the official Epson site. When prompted to choose your printer, enter the printer model number (Epson WF 4520)in the search field.

•  Next, click the Manuals and Warranty tab and select the PDF link next to User's Guide.

•  The manual will now open as a PDF.

•  Click the Download icon in the PDF to download the printer manual.

EPSON WF Pro 4520 WIRELESS SETUP - STEPS

Using the printer's control panel:

•  Before starting, identify the network settings such as SSID and network key from your router's label.

•  Ensure that you have placed your printer closer to the router.

•  Turn on your printer and the router.

•  Navigate to the printer's control panel and press the Setup button.

•  Select the Wi-Fi/Network Settings option and press the OK button.

•  Choose the Wi-Fi Setup option and press the OK button.

•  Select the Wi-Fi Setup Wizard option and choose your SSID from the displayed list.

•  If the SSID is not listed, enter it manually.

•  Input your wireless network key and press the OK button.

•  Select Done and press the Copy button to exit the wireless setup menu.

•  Check if the Wi-Fi light stops flashing on the printer.

•  Next, connect your PC to the same Wi-Fi network using the right network credentials.

•  Run the driver installation using the supplied CD-ROM or downloaded driver package.

•  Agree to the EULA and choose the Wireless connection option as your connection type when prompted.

•  Finish the driver installation and try printing a test page remotely from your computer to the printer.

EPSON WF Pro 4520 AIRPRINT - STEPS

•  Epson AIRPrint is a mobile printing app for both Android and iOS devices.

•  Using the Epson iPrint app, you can print photos, emails, and web pages.

•  To print any photos from your iPhone to the Epson WF Pro 4520 printer using the iPrint app, keep reading the instructions.

•  Before you begin, connect your printer and the iPhone to the same wireless network.

•  Download the Epson iPrint app from the Apple App Store.

•  After completing the download, launch the app by touching its icon on the main screen.

•  If the Epson iPrint app shows that your printer is not selected, tap on the message and select your printer's name from the displayed list.

•  Tap on Photos and choose the folder from which you wish to select your photos.

•  After selecting the required photos for printing, tap the Settings icon at the top-right corner to modify the print settings.

•  Tap Done and select Print to start printing your photos.

EPSON WF Pro 4520 FAX SETUP - STEPS

Fax setup using the printer's control panel:

•  First, connect the supplied telephone line cord to your printer's LINE port.

•  Connect the other end to a telephone wall jack.

•  Navigate to the printer's control panel and press the Setup button.

•  Select the Printer Setup option using the navigation keys and press the OK button.

•  Choose your region/country and press the OK button.

•  Confirm the selected settings and set the correct date and time.

•  Open the Fax Settings menu and choose the Communication option.

•  Select Header and then choose Fax Header.

•  Input the sender name for your fax source and select Done.

•  Choose the Your Phone Number option and press the OK button.

•  Enter your fax number and select the fax send and receive settings from the Fax Settings menu.

•  Before printing fax reports, verify that you have loaded the paper cassette with some plain paper.

•  Press the Fax button followed by Menu.

•  Select the Fax Report option and press the OK button.

•  Finally, press the Start button to print the fax report.

•  You have now set up Fax on Epson WF Pro 4520 printer

HOW TO SCAN ON EPSON WF Pro 4520 - STEPS

•  You can scan either using the printer's control panel or Epson Scan software.

•  Before starting the scan, verify that you have installed the printer software on your computer.

•  Next, connect your Epson WF Pro 4520 printer to the computer using a standard USB cable. You can also connect them over a wireless network.

•  Load the original document you wish to scan into the ADF or onto the scanner glass.

•  To perform the scan using the control panel buttons, press the Scan button first and then select any one of the following scan options.

•  Scan to USB Device

•  Scan to PC

•  Scan to PC (PDF)

•  Scan to PC (Email)

•  Scan to PC (WSD)

•  After choosing your scan option, select how you have connected the printer to your computer.

•  For 2-sided scanning, your original document should be loaded into the ADF.

•  To select the required scan settings, press the Menu button and select Scan Settings followed by 2-Sided Scanning.

•  Finally, press the Color Start button to start scanning your original document.

EPSON WF Pro 4520 SCAN TO COMPUTER - STEPS

•  First, turn on the scanner and connect it to your computer via a USB cable.

•  Now, place the original document you want to scan on the scanner glass.

•  Navigate to the printer's control panel, press the Scan button, and select the Scan to PC option.

•  Next, select the USB Connection option and press the Color Start button.

•  Now, the printer will scan the original document and send the scanned data to the connected computer.

EPSON WF Pro 4520 TROUBLESHOOTING - STEPS

Is your Epson WF Pro 4520 printer malfunctioning frequently? There might be issues with the printer settings or you might have done an incomplete installation of the printer driver. You have to select the right troubleshooting process after identifying the cause to fix the issue you are facing. Sometimes, restarting your printer itself can fix the error. If you have any difficulties while troubleshooting your printer problems, contact our technical support team for remote assistance by clicking the Call button on this page.